tempered sorbite

基本解释

Microstructure of working layer in the barrel: pearlite or tempered sorbite.
辊身工作层金相组织为：珠光体或回火索氏体。
The lath character of martensite in welded joint disappears, and the carbide in the tempered sorbite of the base metal will aggregate when temper temperature is above 780℃, and the hard…
回火温度超过780℃，焊缝板条马氏体特征消失，母材回火索氏体中碳化物产生偏聚，硬度、塑性明显降低。
The results indicated that the tempered sorbite was the optimum microstructure, the inhomogeneous distribution of micro hardness affected markedly the finish quality of the steel surface.
结果表明：回火索氏体是最佳的组织形态；微观硬度的不均匀性显著影响钢的表面加工质量。

回火索氏体
It is also found that the high-temperature wear resistance of tempered troostite is superior to tempered martensite and tempered sorbite.
回火屈氏体具有较好的高温磨损性能,回火马氏体和回火索氏体的磨损性相对较差。